I-CPE-135A
I-CPE-135A
I-polyethylene ene-chlorine iyinto ye-polymer egcwele, ukubukeka kwayo kuyimpuphu emhlophe, ayinabo ubuthi futhi ayinambitheki, inokumelana okuhle kakhulu nesimo sezulu, ukumelana ne-ozone, ukumelana namakhemikhali nokuguga, futhi inokumelana okuhle namafutha, ukubambezeleka komlilo kanye nokusebenza kombala. Ukuqina okuhle (kusaguquguquka ku--30C), ukuhambisana okuhle nezinye izinto ze-polymer, kanye nokushisa okuphezulu kokubola.
I-CPE-135A ayinawo amakristalu futhi inokumelana okuhle kakhulu komlilo, ukuvikela ugesi, ukumelana namakhemikhali, ukumelana namafutha kanye nokumelana namanzi; ihambisana kahle ne-PVC, Cr, NBR, njll. Ingasetshenziswa futhi njengesibambisi somlilo semikhiqizo ye-ABS, izintambo kanye nezindawo zikagesi, izinto ze-foam ze-PVC eziguquguqukayo, izilungisi zamarabha akhethekile okwenziwa, amarabha ajwayelekile okwenziwa, kanye nama-plasticizer e-PVC namanye amapulasitiki. Uma kuqhathaniswa ne-polyethylene ejwayelekile ene-chlorine emakethe, i-polyethylene ye-Bontecn ene-chlorine inezici zokushisa okuphansi kokushintsha kwengilazi, ukusebenza okuphezulu kokucubungula kanye nokwelulwa okuphezulu ngesikhathi sokuphumula. Luhlobo lwerabha ekhethekile esebenza kahle kakhulu, esezingeni eliphezulu. Ingasetshenziswa yodwa noma ihlanganiswe nerabha ye-ethylene-propylene, irabha ye-butadiene-propylene kanye nerabha ye-chlorostyrene ukukhiqiza imikhiqizo yerabha. Imikhiqizo ekhiqizwayo inokuphila isikhathi eside kwenkonzo futhi imelana ne-UV. Kungakhathaliseki ukuthi imvelo nesimo sezulu sinzima kangakanani, ingagcina izakhiwo zerabha isikhathi eside.
| ipharamitha | iyunithi | Izinga lokuhlola | I-CPE-135A |
| Ukubukeka | —— | Ukuhlolwa okubonakalayo | Impuphu emhlophe |
| Okuqukethwe kwe-chlorine | % | —— | 35±2 |
| ukuminyana kobuso | g/cm³ | GB/T 1636-2008 | 0.50±0.10 |
| Isihluzo se-residue (i-mesh engu-0.9mm) | % | I-RK/PG-05-001 | ≤0.2 |
| Okuguquguqukayo | % | I-RK/PG-05-003 | ≤0.4 |
| Okusele (750℃) | % | I-GB/T 9345-2008 | ≤5.0 |
| amandla okudonsa | I-MPa | I-GB/T 528-2009 | 8-13 |
| Ukwelula ngesikhathi sokuphumula | % | I-GB/T 528-2009 | ＞800 |
| Ugu Lokuqina A | —— | GB/T 531-2008 | ≤65 |
1. Ukwelulwa okuhle kakhulu ngesikhathi sokuphuka kanye nokugeleza okuhle kakhulu kwempuphu;
2. Nikeza imikhiqizo ye-PVC ukuqina okuhle;
3, Ubulukhuni obuhle kakhulu kanye namandla okuqina;
I-CPE135A inokumelana okuhle kakhulu nomlilo kanye nokumelana nokushaya, ingandisa ukuqina kanye namandla okushaya kwe-PVC, futhi ingasetshenziswa kabanzi emikhiqizweni eqinile ye-PVC efana namaphrofayili e-PVC, amapayipi kanye nokufakwa, amapuleti, izintambo, njll.
